There are always some unknown reasons to get unnecessary Bspline Curves, such as extract faces/edges from 3D Solids in Civil Engineering. In fact, some / all of those Bspline Curves are linear (the total length of Curve Equal to Line from two poin...

We often receive vendor models in formats that include Parasolid, IGES, STEP, and ACIS. When adding these file types to our 3D models, we experience processing issues due to the high detail contained in the vendor models. Currently we have to use ...

‘Variable based filters’- we have filters available only for the Blend Radius, Hole Diameter and Face Area (Check attached example, where, when you change value of variable Filter_Hole_Dia_Limit and Filter_Blend_Rad_Limit to something greater than...

Idea is to add parametric capabilities to in the "loft rectangular to circle" tool in both surface and solid modelling. it can be link to the variables and should have orthogonal or non-orthogonal positioning for circular end/rectangular/square en...

For the revolution, polar array feature, Spin Face, Torus Solid tools, it is possible to set the profile and other data but never the axis. This is a problem when creating variations, or when the rotation axis is modified by changing parameters. I...

Add the ability to link the X,Y, and Z scale of a graphic cell to a variable so it could be controlled in a parametric scale. For complex elements (trees, meshes,...) that cannot be defined by standard constrains.This will be a massive competitive...

IT would be beneficial if you were able to assign item types to imported IFC models, and then apply Item Type information to these imported models and elements, where you can pull the original IFC properties in via query, at the moment we are unab...

Welding symbol is quite common and should be there in the Base platform too. I have loaded the detweld.dll /ma files from the mdl application. its giving this error. "OS could not load C:\Configuration\ConfigurationSets\Hatch\Hatch_Common\mdlapps\...

In Revit Reference plane Properties, you can set the reference plane priority by “Is Reference,” which can control how the reference plane acts when creating a family or after loading it in a project. For example, with a Strong reference, the refe...

When exporting to FBX there are a couple of settings that can be altered such as invert X and Y. Changes to the default of these settings are not stored anywhere, and thus need to be set manually every session. it would be nice to have a variable ...